For Laboratory and Research Use Only. Not for Human or Veterinary Use.
Buy one, get one free on single vials. Free vial added automatically in the cart.
Official Peptique website·Verify official site
PEPTIQUE

Home / Catalog / Research blends / Glow Blend

Peptique Glow Blend single vial
1 / 4
Batch documentation available. 1 specimen documents in this gallery. Review the report for the lot on your vial before use.

Peptique research catalog

Glow Blend

GHK-Cu 50 mg · BPC-157 10 mg · TB-500 10 mg

Research materialBatch documentationSecure checkout
$59.00

70 mg · Single vial · $0.84 per mg · SKU PQ-GLW-70

Format

Strength

Delivery schedule
  • 15% off every deliveryOn every single vial, for as long as the subscription runs.
  • Free shipping every timeNo minimum on a subscription order. One-time orders ship free over $99.
  • Your price is lockedThe price you start on is held for twelve months, through any list change.
  • Lot-matched COA emailedThe Certificate of Analysis for the lot you were shipped, with every delivery.
  • Skip, pause or cancelAny time, from the account page. No call, no retention script.

Subscribing on this selection saves $106.20 a year against the one-time price.

Charged per delivery at the locked price. Skip, pause or cancel at any time from the account page. Subscriptions are for laboratory research materials and carry the same Research Use Only terms as a one-time order.

Buy more, save moreVolume pricing
  • 1 to 2StandardRegular price
  • 3 to 5Save 5%Tap for 5 vials
  • 6 to 9Save 10%Tap for 9 vials
  • 10+Shop kits
Unit price
$59.00
Price per mg
$0.84
Order total
$59.00
You save
$0.00
01Research focusedLaboratory research materials
02DocumentedLot report in the COA library
03TrackedOrder fulfillment updates
✓ Secure paymentVisa · Amex · Discover · Bank · BTC

Laboratory diluent

Sealed bench reagent for dissolution and analytical work. Peptique does not sell syringes, needles, swabs or any product used to prepare an administration.

Research use onlyLaboratory research materials. Not for human or veterinary use.
01Research Product Information

Peptique supplies compounds for controlled laboratory research and analytical work.

  • For research and analytical use only
  • Not intended for human consumption or administration
  • Not intended for veterinary use
  • Not represented as a drug, medicine or therapeutic product
  • Laboratory researchers are responsible for appropriate protocols and controls
02Lyophilized Product Format

Where applicable, Peptique research materials are supplied as a lyophilized solid.

  • Appearance can differ between compounds and production lots
  • Lyophilized material may present as a cake, a film or fragments
  • The visible quantity can look small relative to the vial
  • Appearance alone does not establish identity or purity; the lot report does
03Storage and Laboratory Handling

Storage requirements vary by compound and lot. Refer to the label and the lot documentation.

  • Protect research materials from excessive heat
  • Limit exposure to direct light and moisture
  • Keep containers sealed when stored
  • Follow the product-specific temperature guidance on the label
  • Use appropriate laboratory contamination-control procedures
04Packaging and Quality Documentation

Packaging components can vary slightly between production lots, including closures, caps and label placement.

  • Check the label and the lot identifier before laboratory use
  • Inspect the vial and closure for visible shipping damage
  • Every vial carries the compound, the strength and the lot
  • Lot documentation is published in the COA library
View the COA library
Research notice

For laboratory and research purposes only. Not intended for human consumption, diagnostic use, therapeutic use, or administration to humans or animals.

View documentation →

Research material · Glow Blend

Glow Blend research reference

Glow Blend is a three-component lyophilized research blend of GHK-Cu, BPC-157 and TB-500 in a defined 70 mg formulation (50 mg, 10 mg and 10 mg). Supplied by Peptique exclusively for controlled laboratory and analytical research, in single vials and 10-vial kits, with a lot-matched Certificate of Analysis.

Three-component blend70 mg totalGHK-Cu 50 mgBPC-157 10 mgTB-500 10 mgLot traceability
01Compound profile

Glow Blend research material

Glow Blend is a defined multi-component research preparation that combines three separately identifiable peptide materials in a single lyophilized vial: 50 mg GHK-Cu, 10 mg BPC-157 and 10 mg TB-500, for a total stated content of 70 mg. Each component is also listed in the Peptique catalog on its own.

The blend is supplied strictly as a laboratory research material for environments where a defined multi-component peptide sample is required in an analytical or experimental workflow. References to the individual components and to the published literature are provided for identification, analytical context and research documentation only.

02Identification

Research material identification

Accurate compound identification and lot-level documentation are the two components a controlled study depends on. The identifiers below locate the public record for the reference substance; the lot report characterizes the material in the vial.

Product
Glow Blend, 70 mg
Component 1
GHK-Cu, 50 mg, CAS 89030-95-5
Component 2
BPC-157, 10 mg, CAS 137525-51-0
Component 3
TB-500, 10 mg, CAS 885340-08-9
Material class
Multi-component peptide blend, research material
Form
Lyophilized solid
Intended use
In vitro laboratory research
03Composition

Three components, one defined ratio

GHK-Cu, 50 mg

The copper-binding tripeptide complex, the primary component by mass.

BPC-157, 10 mg

The synthetic pentadecapeptide, at a defined 10 mg quantity.

TB-500, 10 mg

The thymosin beta-4 fragment, at a defined 10 mg quantity.

50:10:10

The documented ratio, stated for material identification and laboratory recordkeeping. The lot report gives the measured content of each component.

04Research environment

Controlled multi-component work

Analytical characterization

Identity, composition and other analytical characteristics of the blend investigated with appropriate laboratory methods.

Multi-component analysis

Three identified peptide components within a single laboratory sample.

Comparative research

Reference-based or comparative experimental workflows designed by qualified laboratories.

Research documentation

Product identification, lot information and the published report support recordkeeping and traceability.

05Research environment

Laboratory research applications

Supplied for use within appropriate research environments by personnel familiar with laboratory procedures, material identification, contamination control and experimental documentation.

Material preparation

Suited to laboratory workflows that call for a defined, documented research material inside an established experimental protocol.

Analytical workflows

Suited to controlled procedures where the researcher independently determines material suitability for the assay in hand.

Research documentation

Product identity and lot information support organized laboratory recordkeeping and later review.

Controlled handling

Researchers remain responsible for selecting handling procedures and contamination-control practices.

06Quality documentation

Lot-specific analytical information

Research conclusions should rest on the analytical documentation for the specific production lot being evaluated. General product-page information is not a substitute. The lot report records:

  • Compound identification
  • Production lot reference
  • Declared material quantity
  • Analytical testing information
  • Purity information where applicable
  • Testing methodology where documented
  • Certificate of Analysis for the lot
  • Research material traceability
07Traceability

Research records and lot control

01Identify

Confirm the compound, the selected strength and the lot identifier on the label.

02Match

Open the lot's report in the COA library and confirm the lot number matches.

03Review

Read the laboratory, the sample identifiers, the methods and the reported measurements.

04Preserve

Keep the product, lot, analytical, receipt and storage records with your research documentation.

08Laboratory handling

Storage and container integrity

  • Keep the original sealed container during storage
  • Protect from direct sunlight and excessive heat
  • Store lyophilized material at -20C, protected from light and moisture
  • Inspect container and closure integrity before laboratory use
  • Observe appearance and record it with the lot in your research records
  • Use appropriate contamination-control procedures
09Restrictions

Research use limitations

Glow Blend is supplied exclusively as a laboratory research material. It is not offered or represented as a medicine, pharmaceutical preparation, dietary supplement, cosmetic or consumer product.

  • Not for human administration
  • Not for veterinary administration
  • Not for ingestion or injection
  • Not for personal experimentation
  • Not for pharmaceutical compounding
  • Not for pharmacy preparation
  • Not for diagnostic or therapeutic use
  • Not for clinical use
10Research FAQ

Glow Blend research questions

What is Glow Blend?
Glow Blend is a synthetic research peptide supplied by Peptique as a lyophilized laboratory material. It is sold for in vitro research and analytical use only.
What form is the material supplied in?
A lyophilized solid in a sealed glass vial. Appearance can vary by lot and does not indicate identity or purity; the lot's Certificate of Analysis does.
Is Glow Blend intended for human use?
No. Peptique supplies this product strictly for laboratory research. It is not a drug, food, supplement or cosmetic and is not for human or veterinary use.
Does Peptique provide dosing or administration instructions?
No. Peptique does not provide dosing, administration, injection, therapeutic or personal-use instructions for any product.
Why is the lot number important?
Analytical results apply to the tested lot only. The lot on your vial is what links the material in hand to its report in the COA library.
Is analytical documentation available?
Yes. A lot-matched Certificate of Analysis is published for every released lot and is linked from this page and from the COA library.
What does Glow Blend contain?
50 mg GHK-Cu, 10 mg BPC-157 and 10 mg TB-500 per vial, 70 mg in total.
Is it a single peptide?
No. It is a multi-component formulation with three identified peptide materials in one lyophilized vial.
Can I get the components separately?
Yes. GHK-Cu, BPC-157 and TB-500 are each in the catalog as single-compound vials and kits.
Research use only

Laboratory research material

For laboratory research use only. Not intended for human or veterinary use, administration, ingestion, injection, personal experimentation, pharmaceutical compounding, pharmacy preparation, diagnostic, therapeutic or clinical use. Nothing on this page is medical advice or a claim to diagnose, treat, cure or prevent any disease.

Continue exploring

Related research materials.

View all products
$59.0070 mg