- CAS Number
- 2381089-83-2
- Molecular Weight
- 4731.2 g/mol
- Purity
- 99%+ by HPLC
GLP research
Retatrutide
Triple-receptor research compound. Single vials from 5 mg to 60 mg, 10-vial kits to 100 mg, every lot documented.
Home / Catalog / Lab supplies / Reconstitution Solution
1 / 3
Batch documentation available. Lot documentation is published in the COA library. Review the report for the lot on your vial before use.
Peptique research catalog
Reconstitution Solution
Laboratory research diluent · 0.9% benzyl alcohol
Research materialBatch documentationSecure checkout
In stock. Order in --:--:-- and it ships today.
$24.00
30 mL · Single vial · $0.80 per mL · SKU PQ-RSL-30ML
Format
Size
One lot, ten labeled vials, one carton. Price per vial shown below.
Buy more, save moreVolume pricing
- 1 to 2StandardRegular price
- 3 to 5Save 5%Tap for 5 vials
- 6 to 9Save 10%Tap for 9 vials
- 10+Packs
- Unit price
- $24.00
- Price per mL
- $0.80
- Order total
- $24.00
- You save
- $0.00
BOGO Vials shipped: 2 (1 paid, 1 free)
01Research focusedLaboratory research materials
02DocumentedLot report in the COA library
03TrackedOrder fulfillment updates
✓ Secure paymentVisa · Amex · Discover · Bank · BTC
Laboratory diluent
Sealed bench reagent for dissolution and analytical work. Peptique does not sell syringes, needles, swabs or any product used to prepare an administration.
Research use onlyLaboratory research materials. Not for human or veterinary use.
01Research Product Information
Peptique supplies compounds for controlled laboratory research and analytical work.
- For research and analytical use only
- Not intended for human consumption or administration
- Not intended for veterinary use
- Not represented as a drug, medicine or therapeutic product
- Laboratory researchers are responsible for appropriate protocols and controls
02Lyophilized Product Format
Where applicable, Peptique research materials are supplied as a lyophilized solid.
- Appearance can differ between compounds and production lots
- Lyophilized material may present as a cake, a film or fragments
- The visible quantity can look small relative to the vial
- Appearance alone does not establish identity or purity; the lot report does
03Storage and Laboratory Handling
Storage requirements vary by compound and lot. Refer to the label and the lot documentation.
- Protect research materials from excessive heat
- Limit exposure to direct light and moisture
- Keep containers sealed when stored
- Follow the product-specific temperature guidance on the label
- Use appropriate laboratory contamination-control procedures
04Packaging and Quality Documentation
Packaging components can vary slightly between production lots, including closures, caps and label placement.
- Check the label and the lot identifier before laboratory use
- Inspect the vial and closure for visible shipping damage
- Every vial carries the compound, the strength and the lot
- Lot documentation is published in the COA library
Research notice
For laboratory and research purposes only. Not intended for human consumption, diagnostic use, therapeutic use, or administration to humans or animals.
View documentation →Research material · Reconstitution Solution
Reconstitution Solution research reference
Peptique Reconstitution Solution is a pH-balanced aqueous laboratory research diluent formulated with 0.9% benzyl alcohol, supplied in 3 mL, 10 mL and 30 mL vials and in multi-vial packs for controlled analytical and laboratory research applications.
0.9% benzyl alcoholpH-balanced solutionLaboratory research3, 10 and 30 mLSingles and packsLot traceability
01Compound profile
Reconstitution Solution research material
Peptique Reconstitution Solution is a pH-balanced aqueous laboratory research diluent formulated with 0.9% benzyl alcohol. It is supplied as an aqueous laboratory material for research environments where a controlled, documented diluent formulation is required inside an established experimental protocol, in 3 mL, 10 mL and 30 mL sealed glass vials.
It is supplied for use within appropriate research environments by personnel familiar with laboratory procedures, material identification, contamination control and experimental documentation. Not intended for human or veterinary administration, therapeutic use, diagnostic use, clinical use or personal experimentation.
02Identification
Research material identification
Accurate compound identification and lot-level documentation are the two components a controlled study depends on. The identifiers below locate the public record for the reference substance; the lot report characterizes the material in the vial.
- Product
- Reconstitution Solution
- Material type
- Laboratory research diluent
- Composition
- pH-balanced aqueous solution, 0.9% benzyl alcohol
- Sizes
- 3 mL, 10 mL, 30 mL
- Intended use
- Controlled laboratory applications
03Material handling
Storage and container integrity
- Keep the original sealed container during storage
- Protect from direct sunlight and excessive heat
- Do not freeze unless the product documentation says otherwise
- Inspect container and closure integrity before laboratory use
- Observe solution clarity and visible condition
- Use appropriate contamination-control procedures
04Product support
Peptique compatibility policy
When Peptique evaluates a reported dissolution, precipitation, cloudiness or other material-preparation concern involving one of its lyophilized research compounds, the source and identity of the diluent used is an important part of that evaluation. Support eligibility for preparation-related concerns is limited to use with verified diluent products whose formulation and source can be established: Peptique Reconstitution Solution, whose source and specification Peptique can verify, or a genuine manufacturer-sealed product whose authenticity and identity can reasonably be established.
05Third-party materials
Unverified diluent policy
Peptique cannot verify the formulation, authenticity, storage history, handling conditions or quality of diluents bought from unrelated marketplaces, resellers or other third-party suppliers. Where an unverified diluent has been used, Peptique may be unable to determine whether a reported issue originated with the research compound, the diluent, storage conditions, the handling procedure or another variable. That applies to cloudiness or unexpected appearance, visible particulate matter, incomplete dissolution, precipitation, unexpected discoloration and other preparation-related inconsistencies.
06Research environment
Laboratory research applications
Supplied for use within appropriate research environments by personnel familiar with laboratory procedures, material identification, contamination control and experimental documentation.
Material preparation
Suited to laboratory workflows that call for a defined, documented research material inside an established experimental protocol.
Analytical workflows
Suited to controlled procedures where the researcher independently determines material suitability for the assay in hand.
Research documentation
Product identity and lot information support organized laboratory recordkeeping and later review.
Controlled handling
Researchers remain responsible for selecting handling procedures and contamination-control practices.
07Quality documentation
Lot-specific analytical information
Research conclusions should rest on the analytical documentation for the specific production lot being evaluated. General product-page information is not a substitute. The lot report records:
- Compound identification
- Production lot reference
- Declared material quantity
- Analytical testing information
- Purity information where applicable
- Testing methodology where documented
- Certificate of Analysis for the lot
- Research material traceability
08Traceability
Research records and lot control
01Identify
Confirm the compound, the selected strength and the lot identifier on the label.
02Match
Open the lot's report in the COA library and confirm the lot number matches.
03Review
Read the laboratory, the sample identifiers, the methods and the reported measurements.
04Preserve
Keep the product, lot, analytical, receipt and storage records with your research documentation.
09Laboratory handling
Storage and container integrity
- Keep the original sealed container during storage
- Protect from direct sunlight and excessive heat
- Avoid freezing the diluent; store lyophilized compounds as the label directs
- Inspect container and closure integrity before laboratory use
- Observe appearance and record it with the lot in your research records
- Use appropriate contamination-control procedures
10Restrictions
Research use limitations
Reconstitution Solution is supplied exclusively as a laboratory research material. It is not offered or represented as a medicine, pharmaceutical preparation, dietary supplement, cosmetic or consumer product.
- Not for human administration
- Not for veterinary administration
- Not for ingestion or injection
- Not for personal experimentation
- Not for pharmaceutical compounding
- Not for pharmacy preparation
- Not for diagnostic or therapeutic use
- Not for clinical use
11Research FAQ
Reconstitution Solution research questions
What is Reconstitution Solution?
Reconstitution Solution is a synthetic research peptide supplied by Peptique as a lyophilized laboratory material. It is sold for in vitro research and analytical use only.
What form is the material supplied in?
A lyophilized solid in a sealed glass vial. Appearance can vary by lot and does not indicate identity or purity; the lot's Certificate of Analysis does.
Is Reconstitution Solution intended for human use?
No. Peptique supplies this product strictly for laboratory research. It is not a drug, food, supplement or cosmetic and is not for human or veterinary use.
Does Peptique provide dosing or administration instructions?
No. Peptique does not provide dosing, administration, injection, therapeutic or personal-use instructions for any product.
Why is the lot number important?
Analytical results apply to the tested lot only. The lot on your vial is what links the material in hand to its report in the COA library.
Is analytical documentation available?
Yes. A lot-matched Certificate of Analysis is published for every released lot and is linked from this page and from the COA library.
What is Peptique Reconstitution Solution?
A pH-balanced aqueous laboratory research diluent containing 0.9% benzyl alcohol, supplied for controlled laboratory research applications.
What sizes are available?
3 mL, 10 mL and 30 mL single vials, plus 10-packs of the 3 mL and 10 mL sizes, a 5-pack and a case of 25 of the 30 mL size, subject to current inventory.
Why does the source of a research diluent matter?
Different products can vary in composition, pH, manufacturing conditions, storage history, packaging and overall material quality. Those variables can affect laboratory observations and should be considered when evaluating experimental results.
What happens if an unverified third-party diluent is used?
Peptique cannot verify materials from unrelated suppliers, which can limit its ability to evaluate a preparation-related support claim because the source of the observed issue cannot be reliably isolated.
Research use only
Laboratory research material
For laboratory research use only. Not intended for human or veterinary use, administration, ingestion, injection, personal experimentation, pharmaceutical compounding, pharmacy preparation, diagnostic, therapeutic or clinical use. Nothing on this page is medical advice or a claim to diagnose, treat, cure or prevent any disease.
Product reference
Specifications
Product information as listed in the Peptique catalog record.
- Product
- Reconstitution Solution
- Category
- Lab supplies
- Single vials
- 3 mL, 10 mL, 30 mL
- Packs
- 3 mL x10, 10 mL x10, 30 mL x5, 30 mL case of 25
- Documentation
- Published by lot in the COA library
Analytical data
| Composition | Aqueous solution with 0.9% benzyl alcohol |
|---|---|
| pH | Balanced; stated on the lot documentation |
| Available sizes | 3 mL, 10 mL, 30 mL |
| Container | Sealed glass vial |
| Documentation | Lot information where available |
Analytical documentation
COA and testing
Every released lot has a Certificate of Analysis from an independent laboratory, published in the COA library and linked here by lot. Results apply to the tested lot only. Match the lot on your vial to its report.
View analytical documentation →01Batch reference
Match the documentation to the compound, the strength and the lot identifier on the label.
02Analytical information
Identity by LC-MS, purity by RP-HPLC, net content per vial, endotoxin, sterility, heavy metals and appearance.
03Research records
Keep the product and lot documentation with your research records for the life of the study.
Lots for this product
- LOTLot documentation for this product is published in the COA library as lots are released.Library
Specimen documents show the certificate layout with results pending. Measured values are published only from the laboratory report for the named lot.
Fulfillment
Shipping and storage
Shipping options and delivery estimates are shown at checkout. Orders placed before 2PM EST on a business day ship the same day from our U.S. facility with tracking. Free shipping on orders over $300.
OrderSecure checkout
Card, bank transfer and crypto are presented at checkout. A 21+ researcher attestation is part of every order.
DeliveryTracked fulfillment
UPS 2-Day or USPS Priority by default, discreet plain carton, tracking number by email. Photographed and weighed before dispatch.
HandlingProduct documentation
Use the label and the lot documentation for storage guidance. Report visible transit damage within 7 days with photographs of the carton and the label.
- Lyophilized compounds: store at -20C, protected from light and moisture, container sealed
- Reconstitution Solution: store at room temperature, protect from heat and light, do not freeze
- Returns: unopened, sealed items within 30 days; opened research materials are not returnable
- Lost in transit: carrier-confirmed loss is reshipped at no charge
Continue exploring
Related research materials.
- CAS Number
- 137525-51-0
- Molecular Weight
- 1419.5 g/mol
- Purity
- 99%+ by HPLC
Research peptides
BPC-157
Synthetic pentadecapeptide for cellular signaling and biochemical stability studies. 10 mg and 20 mg.
- CAS Number
- 885340-08-9
- Molecular Weight
- 889.0 g/mol
- Purity
- 99%+ by HPLC
Research peptides
TB-500
Synthetic thymosin beta-4 fragment for cellular migration and protein interaction studies. 10 mg.
- CAS Number
- 170851-70-4
- Molecular Weight
- 711.9 g/mol
- Purity
- 99%+ by HPLC
Research peptides
Ipamorelin
Synthetic pentapeptide for GHS-R interaction and peptide signaling studies. 5 mg and 10 mg.